 | 54 single-crystal cells connected in series |
| Peak power of 173 Watts at 25.1 Volts |
| Designed for optimum use in residential and
commercial grid-tied applications |
| 25-year limited warranty on power output, 5-year
limited warranty on materials and workmanship* |
| Pre-wired junction box with MC Connectors |
| Output power tolerance of +/-5% ensures module
satisfies maximum rated power output |
| Robust, lightweight, clear anodized aluminum frame
with pre-drilled holes for quick installation.
|
Typical Performance Characteristics
|
| GEPV-0173-M |
| Peak Power (Wp) |
Watts |
|
173 |
| Maximum Power Voltage (Vmp) |
Volts |
|
25.1 |
| Maximum Power Current (Imp) |
Amps |
|
6.9 |
| Open Circuit Voltage (Voc) |
Volts |
|
32.2 |
| Short Circuit Current (Isc) |
Amps |
|
7.5 |
| Short Circuit Temperature
Coefficient |
mA/°C |
|
+3 |
| Open Circuit Voltage Coefficient |
V/°C |
|
-0. |
| Maximum Power Temperature
Coefficient |
%/°C |
|
-0.5 |
| Maximum Series Fuse |
Amps |
|
15 |
I-V parameters are rated at Standard
Test Conditions (Irradiance of 1000 W/m2, AM 1.5G, cell
temperature 25°C). As with all single-crystal PV Modules,
during the stabilization process that occurs during the
first few days in service, module power may decrease
approximately 3% from typical maximum power due to a
phenomenon known as Light Induced Degradation (LID). All
measurements are guaranteed at the laminate leads. NOCT is
defined as 800 W/m2, 20 deg. C ambient, and 1 m/s
windspeed.
